Art, Photography, Urbex and Visuals by Francesco Perratone and DoPe
Tag Archives: Perratone
Hello!
A bit late, but here’s March wallpaper!
……Croatia, Sibenik
A very nice historical city, with narrow alleys and steep stone stairs, lovely for taking a walk in a warm summer evening!
The city itself has a turbulent but interesting past, it has been controlled by Byzantium, Hungary, Venice, then the Habsburgs and Austria, more recently Dalmatia, Italy, then became part of Yugoslavia and finally Croatia.
The ancient settlement became a city at least from 1066 AD, when a document from the most important Croatian ruler, Kresimir (Petar Kresimir IV) refers to it.
A note on the shot itself: the horizon line is difficult to spot, (you can guess it from the mountains far back on the right).
The coastlines from the city and the opposite shore are converging, so the overall impression is somewhat “unstable”.
However the mind clings to a vertical line, shaped by the reflection of the city in the sea water, the fortress up the hill and the cloud above….
I personally like it, but probably not everyone will!
The eligible patrons already got their download link 😉
As always here there are the available resolutions:
-For quad-HD monitors and the like: WQHD – aspect ratio 16:9 – resolution 2560×1440
-Full HD: FHD – aspect ratio 16:9 – resolution 1920×1080
Hello everyone, welcome to the new subscribers and thanks a lot to new patrons!
Lately I was pretty busy working on some paid jobs (animations and stuff). My Patreon and MatericLook pages aren’t economically self-sustainable yet, so, until now, they’re a kind of “side-project”.
As more people will share my works, buy them, or become a patron, I will be able to put more time in new projects. I want to create works yo0u appreciate, so tell me what you would like to see next!
During March I will take some days to work exclusively on new art for you, so let me know in the comments what are the works genre you prefer…. Photography or Graphics? Still or animated? Maybe from a geographic area you’ve seen in some of my other works…. Abstract or Concrete? Let me know and I will go in that direction!
If you want to check my works, here you’ll find the stills gallery, here some animations.
Also, there will probably be some more experiments on 360° video/images and VR…. so, stay tuned!
Thanks!
Standard
So, it’s finally snowing here….
until now there’s not much here. It will not last long, maybe more further up the mountains.
Let’s hope so, it will be good to do some late snowshoes hiking, always a good practive for taking some nice winter photos!
Here’s this month multiresolution wallpaper for my patrons, you can find the original article on Patreon here.
You can see part of the ceiling from the basilica, from the Sanctuary of Oropa. The Ancient Basilica is where the statue of the Black Virgin is kept.
The Sanctuary itself is a beautiful place, many of my pictures come from there or from its surroundings, you can see it depicted in some of my works. Plus, many nice hiking trails and walks start right from the Sanctuary, it’s situated on the Alps, near where I live.
You can see more images and find more informations on the Sanctuary here.
The church ceiling itself is interesting because of the decorations and the white “stars”. The painted plaster is dotted (I think it was “hammered”, small parts were removed to produce the starred effect). That, combined with the different hue paints and the lights creates a very nice effect.
As a wallpaper it’s nice because of the black space for icons and stuff, and because of the framing that suggests a window “peeking” on another place.
The picture was taken a few days ago, on a cold 31st of December 😉
While the Sun was disappearing, those beautiful colors faded in…. the view is from the main bridge crossing Donauinsle , an island on the Danube. The area is mainly recreational, restaurant, bars, and nice places to take a walk or a run.
The church silhouette is from St. Francis of Assisi church, also known as Mexico Church or Kaiserjubiläumskirche. Unfortunately it was closed at the time, so I couldn’t take a look inside.
Looking in the opposite direction there was an equally magnificient view. A glass skyscraper was reflecting the light and colors, blending with the background.
Apart from the colors and contrast, I like the geometry and composition, with that nice slice of Moon peeking through the sky…
Enjoy!
My eligible patrons have access to different high resolution versions of the above image, to be used as wallpapers. you can check the Patreon campaign post here.
As (almost) all my works, this is available as a print on large canvas (limited to 10) or cotton paper (signed). If interested you can take a look at the shop. If it’s not available yet, you can contact me directly.
Here are some free works for download as wallpapers, as well as some animations to watch.
If you like this or other of my works, please consider supporting me on Patreon with 1$/month, or donate something through Paypal:
From Freiburg (Germany), Martin’s Gate or Martinstor, one of the ancient city gates.
Hello everyone! I’ve just completed a few jobs that were absorbing me during the last weeks (mainly 3d animations and some electronic assembly for video recording and wireless transmission).
So…. I’m finally able to get back to MatericLook and some (art)works! Months ago I sent out a survey to my subscribers… During the next days I will implement some of the precious suggestions I received back, thanks!
Germany, Freiburg: Martinstor
-The Place
A few months back I visited a dear friend during a weekend… he lives in Alsace, so we had the opportunity to visit Freiburg im Breisgau, a beautiful city in the Southwest part of Germany, close to France and Switzerland. Freiburg is very nice, with a beautiful historical center. It’s the ideal place where to take a walk and have a look at the stunning squares, a merchant’s hall and various gothic buildings, and the cathedral.
-The Work
The shot I used for this work has Martin’s Gate (Martinstor) as a main subject, surrounded by beautiful historical buildings. The lovely geometries of the roofs and top floors give a nice perspective and direct the eye toward the open sky…
I started from an HDR photography (single shot), so I created a few variants, each one optimized to better present a specific part of the image, in terms of lights and shadows. I then used the various parts to assemble more (and nicer) variations.
Then I experimented on each one with some filters and digital painting. This time I used a lot of different digital painting techniques, fully manual but also automated. The latter are almost always unexciting because you have basically no control on the type of strokes and direction… generating, in my opinion, patterns too “uniform” and uninteresting.
I wanted some specific effects I created during the painting. For example the lower parts of the buildings are “streaked”, following each building’s facade direction, to give a more dynamic shape. The sky at this point has a almost uniform “wormy” pattern. I wanted the clock face to look fragmented and a bit fluid, like if seen through a textured glass.
Here’s a detail of the final image (a bit less than half the final resolution). You can see different patterns and strokes all around:
I then identified all the parts I would like to have in my final image, proceeding to put them together (mostly through masking, to control how they overlap and dissolve into each other).
At this point I proceeded with the final steps… After some minor color and light corrections here and there, the lower part of the buildings needed some more darkening. I used a black painting “creeping” on them, following the painting patterns. Also the sky needed some movement through the dark/light “waves” in the middle-right. Plus some more chaotic patterns around the top and right border.
Last steps: some highlights/reflections accents on the gate rooftop. And slight modifications to all roofs’ tops to give them a twisted, more gothic and less perfect look. These also disrupt the shapes geometry and perspective alignment. I think it makes the work more interesting to look at.
And that’s all for now, I hope you’re enjoying the images and the description has been somewhat inspiring 😉
As (almost) all my works, this is available as a print on large canvas (limited to 10) or cotton paper (signed). If interested you can take a look at the shop. If it’s not available yet, you can contact me directly.
Here are some free works for download as wallpapers, as well as some animations to watch.
If you like this or other of my works, please consider supporting me on Patreon with 1$/month, or donate something through Paypal:
Hello! lately I’ve been absent, due to a few overlapping projects as a freelancer… sorry about that. I couldn’t complete any new work, but I want to update you on what’s going on and throw some ideas around 😉
The freelancing projects I’m working on are (partially) related to graphics and the like, I’m speaking of 2D animation, 3D animation and some electronics (related to transmitting and recording video wirelessly).
BUT I’m also working on an art-related project with Paolo. We’re creating a pair of “video” installations, one similar to a projeciton mapping on a real icosahedron:
(DISCLAIMER: the following pics and video aren’t nice, they’re purely for documentation purposes; also, you’ll find some light technical babble reading on)
A standard projector will cover half the icosahedron’s shape. It will be placed in a room corner at a friend’s exhibition in November. I’ll use the faces and shape to create some interesting transitions and animations. Some of our previous animations, (mainly from the Spheres series) will be used as elements, as well as new things.
But the second, less defined part is what I have more updates about: Paolo got an old film projector (Super Almo is its name). It was hand-operated and the light came from an old lamp…
We decided to restore and modify it, you can see some pictures here, showing the parts and the modifications. I wanted all changes to be reversible, so I mostly removed and substituted parts. The only “hard” change was done to the manual advancement handle…. you’ll see later why:
So the changes have been made to the lamp, replaced by a crude high intensity LED array. I added along the light path a “reflection cone” to optimize the light flux and reduce dispersion.
The back reflective dish wasn’t useful anymore because the LED are nicely directional, compared to a traditional lamp.
The projector also became A LOT lighter by removing an electric transformer, plus some switches and plugs. Now everything is powered by a refurbished PC power supply.
To the film advancement mechanism then…
Paolo had the idea of “motorizing” it and to somehow paint and draw on a transparent film to show our content… He sourced a (less)old cordless screwdriver, so I worked on a small, simple circuit piloted by a microcontroller (Arduino), constantly moving back and forth the film… enjoy!:
As you can see, “traditional” film isn’t making any sense because of the continuous lighting and speed.
Next we’ll experiment two different things, first to create some ad-hoc content (the painting/drawing I was speaking of, these will evolve along the length of the film roll, to take advantage of the optical effect).
Then I want to use the microcontroller to control the LED lights as a shutter. By turning them on and off pretty fast they should show a sequence of full frames only. This approach will also require (probably) a finer circuit to control the motor (thus film speed).
I will keep you updated on this and other projects, let me know what do you think on the comments! Thank you!
PS one more thing: if you received and answered the survey you should get the small free print, if you haven’t already! Let me know when you get it and what do you think!
